Can I add caravan software to GO 6200?

Hi
@KevinPearson
Welcome to the site....
Click on the Link below
Scroll to the bottom of the screen...
Enter the first 2 Characters of your serial number for a Compatibility check...
Here... https://www.tomtom.com/en_gb/sat-nav/maps-services/shop/travel-map/europe-camper/

Stay Safe... ATB YFM

Hi
@KevinPearson
Purchase the required Map.....
___________________________

The NAV5 (Wi-Fi) devices normally update using Wi-Fi....
If Wi-Fi is not available or is slow/unstable/unreliable.....
See Option... (2) Connect over USB....

TomTom Video... Updating your navigation device using Wi-Fi



If you have successfully connected your device to your Wi-Fi....
To check your Connection Speed, Signal Strength & Quality
On the Device... Tap 4Dot (.... Menu) --> Settings --> Wi-Fi
Tap on Your WI-FI name (The one Showing as connected)
A new Menu Page opens


On the left-hand side of the screen is your Wi-Fi Connection Status

Tomtom recommends a minimum Wi-Fi download speed of 30Mbps
Tomtom NAV5 (Wi-Fi) devices will only connect to a 2.4GHz Wi-Fi network
All the update actions are executed on the device...
___________________________

Option... (1) Connected Wi-Fi
Tap the 4Dot(.... Menu) --> Setting --> Updates & New Items
Extra Maps are Installed/Maintained... Tap the 4Dot(.... Menu) --> Setting --> Maps

I always update my devices one Update at a time
The NavCore Application and QuickFixGPS updates are force ticked by Tomtom... Deselect any other updates like Maps, Speed Cams etc... Update the mandatory item/s first, when complete update the remaining items one at a time

Note... NAV(5 Wi-Fi) devices connected over Wi-Fi do not require MyDrive Connect to be running Even if MyDrive is running you have no access the MyDrive Connect menu structures as used by the previous NAV3 & 4 devices
____________________________

Option... (2) Connected USB
If Wi-Fi is not available or is slow/unstable/unreliable.....
Tomtom recommends a minimum Wi-Fi download speed of 30Mbps

Connecting hard-wired over USB is normally more reliable than any Over The Air Connections
Updating your new device over USB will require "MyDrive Connect"
Get it here..... https://help.tomtom.com/hc/en-gb/articles/360013959499-Installing-MyDrive-Connect

There's no need to login to MyDrive Connect... See Note... (1)
Connect your Device to a USB Port on your PC
The Update will hopefully complete

If you're using a Laptop it would be also more advisable to use a hard-wire connection back from the Laptop to the Router....
_________________________

Note... (1) MyDrive Connect will only show a "Splash screen" saying "Connect your device using Wi-Fi" etc....


If required you can close the 'Main Mydrive Window' showing the "Connect your device using Wi-Fi" Splash screen... MyDrive Connect only needs to run in the background on the PC Taskbar... The NAV(5 Wi-Fi) devices have no access the MyDrive Menu structures as used by the previous NAV3 & 4 devices
Updating a NAV5 (Wi-Fi) device using USB is the same as using Wi-Fi, all the update actions are executed on the device...
Tap the 4Dot (.... Menu) --> Setting --> Updates & New Items
Extra Maps are Installed/Maintained... Tap the 4Dot(.... Menu) --> Setting --> Maps

Stay Safe... ATB YFM

I'm afraid you can't!

Hi
@miketorcy @KevinPearson

miketorcy wrote: »

I'm afraid you can't!

But for devices with serial number starting 'ZA'....
The computer say's 'Yes'....


Also see this post... https://discussions.tomtom.com/en/discussion/comment/1630021/#Comment_1630021

Perhaps @VikramK can clarify.... Yes or No ???

Stay Safe... ATB YFM