Updating map on GO 60 with SD card
Sisyphus
Posts: 3 [Apprentice Seeker]
edited March 2020 in GO 800, 1000, 2000 series / Via series / Start 20 and 60 Series (MyDrive Connect)
The recent North American map update for my Go 60 was too large for my installed 8Gb SDHC card. So I downloaded a smaller version (w/o buildings) on my device which works. I then installed a 32Gb SDHC card and it was recognized and formatted in the device. MyDrive Connect recognizes the new SDHC card so I tried to install the full North America map version. The update starts and then stops at about 5% and hangs up in limbo. The device disconnects and reboots but cannot reconnect and will not start on its own because there are no longer any maps installed. I've retried several times but insanity has set in.
Any ideas on how to proceed? Thanks.
Any ideas on how to proceed? Thanks.
0
Answers
Superuser
Does this help.get the unit started again.
https://discussions.tomtom.com/en/discussion/1034305/what-to-do-if-your-device-displays-no-maps-found/p1?new=1
Doug
I'm using a PNY 32Gb SDHC but thinking of trying a Sandisck 16Gb SDHC???
Superuser
Glad you are sorted. You are not the first to find the odd make of SD card does not work in a Tomtom.
Maybe @VikramK could add a small map to your account which you could load to your unit. It will be loaded on the internal memory and so if you have a problem updating the main map and lose it You have the small map there to help you operate the unit normally and so can sort the problem out. Without the small map you could finish up in the No Map Found situation.
Have a look back here to see if Vikram has responded.
Doug
As Doug suggested, a small map of Venezuela has been activated for your device. If you have this installed on the internal memory then the device it will avoid the no maps error.
Regards
Vikram