Speed camera alerts stopped working

Castroggi
Registered Users Posts: 2 
Apprentice Traveler

Apprentice Traveler
I've tried switching off and on again in settings and it's sounding for other warnings but no longer for speed cameras. Anyone else had and solved this issue?
Tagged:
0
Best Answer
-
Hi
@Castroggi
Welcome to the site....
Have you tried a Soft/Drum roll restart on the device ??? This restarts the devices Operating System afresh
RESETTING YOUR NAVIGATION DEVICE
https://uk.support.tomtom.com/app/answers/detail/a_id/6965//session/L2F2LzEvdGltZS8xNDI2NjM0NDUyL3NpZC9EQTdTVHpobQ
Charge the device for at least 2Hrs "OR" have the device plugged into a power supply
Press and hold the on/off button until you hear a drum-roll sound then release the on/off button.
You won’t lose anything; it’s just like rebooting your PC
I use a Soft/drum-roll start after any upgrade large or small.
It’s also useful to keep in mind for sorting out most minor niggles......
ATB YFM5
Answers
-
Hi
@Castroggi
Welcome to the site....
Have you tried a Soft/Drum roll restart on the device ??? This restarts the devices Operating System afresh
RESETTING YOUR NAVIGATION DEVICE
https://uk.support.tomtom.com/app/answers/detail/a_id/6965//session/L2F2LzEvdGltZS8xNDI2NjM0NDUyL3NpZC9EQTdTVHpobQ
Charge the device for at least 2Hrs "OR" have the device plugged into a power supply
Press and hold the on/off button until you hear a drum-roll sound then release the on/off button.
You won’t lose anything; it’s just like rebooting your PC
I use a Soft/drum-roll start after any upgrade large or small.
It’s also useful to keep in mind for sorting out most minor niggles......
ATB YFM5 -
Hi
@Castroggi
For general improvement using the Tomtom Speed Cam Database over the default settings
Always use a Computer voice...
From the main screen... Tap (.... Menu) -> Setting -> Sounds & Warnings...
Set... 'Warning Type' to... Read Allowed... (Important... Needs a Computer Voice set in the Voices menu)
Speed Cameras & Hazards... Set to ON
The next 10 Setting ALL set to Always
The next 4 Settings ALL set to ON
The device will now say....
'Fixed Camera'
'Mobile Hot Spot'
'Average Speed Camera Zone'
'Red-light Camera'
'Accident Black-spots
‘Spoken Traffic delays’
Speed Cams
If you keep a check on the Traffic-bar... The device gives you a visual Warning of the next Fixed or Mobile Speed Camera many miles before you reach the camera
Even more info if in the 'Setting menus' you setup a Wide Traffic/Route Bar
ATB YFM1 -
Thanks YamFazMan - computing 101 ... switch it off, count to ten, and switch it on again. Why didn't I remember that. Worked a treat!1