SatNav will not turn on in car, it does turn on if I plug into computer? — TomTom Community

SatNav will not turn on in car, it does turn on if I plug into computer?

BlackbambooBlackbamboo Posts: 2 [New Seeker]
edited July 30 in MyDrive Connect
What is wrong? I get a message saying the battery is empty. I have attempted to recharge, it is still empty.
If I plug TomTom into my computer or even a 3pin plug it works. But it will not work in my car. Why not
Tagged:

Comments

  • DougLapDougLap Posts: 2,939 Superuser
    edited July 29
    Hi @Blackbamboo

    Are you using the Tomtom Cig Socket adapter in the car if so can you plug something else into it to check that the socket has not failed.

    If you plug the PND into a USB socket in the car it is not powerful enough to run and charge the unit at the same time.

    Doug
  • YamFazManYamFazMan Posts: 14,977 Superusers
    Hi
    @Blackbamboo

    The Previous NAV4 and Latest (NAV5 WiFi) devices are quite power hungry and can go into "Power saving mode" if not supplied with enough power

    When the device is In use they are designed to be always connected to a power supply
    The Tomtom supplied Power Adapter is rated at 5Volts 1.2Amps
    Even after you have recharged the device externally say via a mains charger, when in use in the vehicle, they will still require being connected to a Tomtom supplied Power Adapter (Or a proven suitable 3rd party Power adapter)
    As a test...
    Try using the Tomtom supplied cable and Tomtom supplied Power Adapter

    The Charger Adaptor and USB Cable supplied by Tomtom WILL run and charge the device at the same time

    Many 3rd party Mismatched Charger Adaptors won't run and charge the device at the same time
    See... It's not simply a power thing.....
    https://discussions.tomtom.com/en/discussion/comment/1182024/#Comment_1182024
    ______________________________________

    (1)... Do NOT attach them to a dashboard USB port in your vehicle as they normally only supply 500mAmp (0.5Amp) and are for data transfer and not supplying power: See... Note (1) & (2)

    (2)... Using a NONE Tomtom 3rd party underpowered or a mismatched cigarette lighter charger can cause the device to go into Power Saving Mode: See... Note (1)

    (3)... On the Models with a built-in SIM, the reduction of power to the SIM can cause the dropping of the traffic info: Note (3)

    Note (1)... At an (Undisclosed) percentage of battery discharge, the device will try to save its power requirements by dimming the screen and eventually powers off the device... Devices with a built-in SIM Card may also lose Live Traffic services
    Note (2)... A dashboard USB port can also fool a NAV4 Device into entering 'Updating Mode' and display the Connected to your Computer splash screen
    Note (3)... I tried connecting my Tomtom GO 6200 to my Cars USB port, checked the connection status it reports 'Connected over USB' --> 'GPRS (SIM) Disconnected'

    ATB YFM

    Help others identify useful content...
    If someone posted something that was helpful?
    Click the 'Like' > 👍 Icon
    ____________________________

    If someone answered your question?
    Please answer 'Yes' to Did this answer the question? 'Yes' < >' No'
    ____________________________
Sign In or Register to comment.

Who's Online15

dhn
dhn
Elchdoktor
Elchdoktor
YamFazMan
YamFazMan
+12 Guests