Battery KO

Suddenly the battery of my device no longer holds the charge. If it is connected to the car battery, everything works correctly. but, as soon as it is detached, it switches off completely and must be restarted from the beginning.
Is it possible to repair or replace the battery?

Answers

  • DougLapDougLap Posts: 2,815 Superuser
    edited June 23
    Hi @Vittorio1946

    There are places that offer a repair service, Tomtom included.

    However look on Youtube and input Change Tomtom Battery and you will find many videos to show you how, some may even cover your model.

    Is your GO5200 not still in warrantee.

    If you are confident of doing it yourself you can get the batteries from Amazon, Ebay etc and also the tools that help you open the unit. All this is done at your own risk. I have changed the battery on my GO5000 which is probably very similar.

    I assume you have left the unit with a flat battery for some time which they do not like.

    Doug
  • YamFazManYamFazMan Posts: 14,806 Superusers
    edited June 23
    Hi
    @Vittorio1946

    The Previous NAV4 and Latest (NAV5 WiFi) devices are quite power hungry and can go into "Power saving mode" if not supplied with enough power

    Many 3rd party Mismatched Charger Adaptors won't run and charge the device at the same time
    See... It's not simply a power thing.....
    https://discussions.tomtom.com/en/discussion/comment/1182024/#Comment_1182024

    When the device is In use they are designed to be always connected to a power supply
    The Tomtom supplied Power Adapter is rated at 5Volts 1.2Amps
    Even after you have recharged the device externally via a mains charger, when in use in the vehicle, they will still require being connected to a Tomtom supplied Power Adapter (Or a proven suitable 3rd party Power adapter)
    ______________________________________

    (1)... Do NOT attach them to a dashboard USB port in your vehicle as they normally only supply 500mAmp (0.5Amp) and are for data transfer and not supplying power: See... Note (1) & (2)

    (2)... Using a NONE Tomtom 3rd party underpowered or a mismatched cigarette lighter charger can cause the device to go into Power Saving Mode: See... Note (1)

    (3)... On the Models with a built-in SIM, the reduction of power to the SIM can cause the dropping of the traffic info: Note (3)

    Note (1)... At an (Undisclosed) percentage of battery discharge, the device will try to save its power requirements by dimming the screen and eventually powers off the device... Devices with a built-in SIM Card may also lose Live Traffic services
    Note (2)... A dashboard USB port can also fool a NAV4 Device into entering 'Updating Mode' and display the Connected to your Computer splash screen
    Note (3)... I tried connecting my Tomtom GO 6200 to my Cars USB port, checked the connection status it reports 'Connected over USB' --> 'GPRS (SIM) Disconnected'
    _______________________________________

    As a test...
    Try using the Tomtom supplied cable and Tomtom supplied Power Adapter

    The Charger Adaptor and USB Cable supplied by Tomtom WILL run and charge the device at the same time

    ATB YFM
    Help others identify useful content...
    If someone posted something that was helpful?
    Click the 'Like' > 👍 Icon
    ____________________________

    If someone answered your question?
    Please answer 'Yes' to Did this answer the question? 'Yes' < >' No'
    ____________________________
  • YamFazManYamFazMan Posts: 14,806 Superusers
    edited June 23
    Hi
    @Vittorio1946

    To Monitor the Battery Status....
    Tap the 4Dot (.... Menu) button... On the Menu Screen top right is a battery status Icon
    Charging... Displays when Connected to a Power supply
    368fa599-f465-4a45-9274-b2b29b56a6d1.jpg
    Full Charge... Displays when Connected or Not Connected Power supply
    ebebfcff-7cf3-43d5-9479-ef4b7f2a85ed.jpg
    Half Charge... Displays when NOT Connected Power supply
    5c45ac4c-1a65-45a0-9b3b-8b88879a94cc.jpg
    Low Battery... Displays when NOT Connected Power supply
    29b0c6f3-11f1-4d8f-9543-eef314472a31.jpg
    One of the worst things you can do to a Lithium battery is to run it flat so at a certain percentage of discharge (Unspecified)... The device will go into 'Power Saving Mode' the screen will dull, and the device will eventually turn itself off (Not Sleep)

    There is a Battery Status display available on the devices Status Screen
    Press and hold the on/off button until you hear a drum-roll sound Continue to hold the on/off button until the Black & White Status screen is shown.....
    c3623f43-813f-4ddf-9e35-af42824c5331.jpg
    If you are worrying about the device charging, you might consider one of these gadgets
    63a11bd6-9bcb-49ec-b71b-9223d7c334dd.jpgOr

    b23e2fef-ffbf-4127-80b0-646533d6f987.jpg
    Simply plug the device into the USB socket and plug your lead into the USB Doctor, the device will display the Voltage and Power being used by your various USB devices
    I have one of each type they're only peanuts to buy, search Amazon/eBay for USB Doctor

    ATB YFM
    Help others identify useful content...
    If someone posted something that was helpful?
    Click the 'Like' > 👍 Icon
    ____________________________

    If someone answered your question?
    Please answer 'Yes' to Did this answer the question? 'Yes' < >' No'
    ____________________________
Sign In or Register to comment.

Who's Online5

5 Guests