Tomtom go 620, how can I get the speed panel to show up, can see speed limit icon or my current spd
Tim1984jones
Registered Users Posts: 7 
Novice Seeker
Novice Seeker
Tomtom go 620, how can I get the speed panel to show up, can see speed limit icon or my current speed, how can I make it show up?
0
Best Answers
-
Hi
@Tim1984jones
Have you tried a Soft/Drum roll restart on the device ???? This restarts the devices Operating System afresh
RESETTING YOUR NAVIGATION DEVICE
https://uk.support.tomtom.com/app/answers/detail/a_id/6965//session/L2F2LzEvdGltZS8xNDI2NjM0NDUyL3NpZC9EQTdTVHpobQ
Charge the device for at least 2Hrs "OR" have the device plugged into a power supply
Press and hold the on/off button until you hear a drum-roll sound then release the on/off button.
You won’t lose anything; it’s just like rebooting your PC
I use a Soft/drum-roll start after any upgrade large or small.
It’s also useful to keep in mind for sorting out most minor niggles......
ATB YFM
5 -
Thanks I will try this0
Answers
-
Hi
@Tim1984jones
The speed limit and your current speed are shown on the left side of the bottom info bar
ATB YFM0 -
It’s not there at all on mine0
-
@Tim1984jones It won't be there until you are moving.0
-
I did try that myself had 10 min drive nothing does it need to be plugged into charger in car?0
-
Hi
@Tim1984jones
When in use the device is designed to be always be connected to a power supply
But being unplugged wont stop the speed limit and your current speed from being displayed
Also see... https://discussions.tomtom.com/en/discussion/comment/1624825/#Comment_1624825
ATB YFM
0 -
Wonder why it’s not showing then hmm0
-
Hi
@Tim1984jones
Have you tried a Soft/Drum roll restart on the device ???? This restarts the devices Operating System afresh
RESETTING YOUR NAVIGATION DEVICE
https://uk.support.tomtom.com/app/answers/detail/a_id/6965//session/L2F2LzEvdGltZS8xNDI2NjM0NDUyL3NpZC9EQTdTVHpobQ
Charge the device for at least 2Hrs "OR" have the device plugged into a power supply
Press and hold the on/off button until you hear a drum-roll sound then release the on/off button.
You won’t lose anything; it’s just like rebooting your PC
I use a Soft/drum-roll start after any upgrade large or small.
It’s also useful to keep in mind for sorting out most minor niggles......
ATB YFM
5 -
Thanks I will try this0
-
Hi
@Tim1984jones
My GO 620
Running a Route Demo/Preview
Plan a route --> Tap 4Dot (.... Menu) --> Current Route or Track --> Play Route or Track Preview
ATB YFM
1
