Via 125 has stopped connection to a valid GPS signal

MAX1245well Registered Users Posts: 1
New Seeker
edited December 2021 in Devices using MyDrive Connect
My Via 125 has stopped connection to a valid GPS signal so I cant go anywhere


  • DougLap
    DougLap Posts: 10,042
    Hi @MAX1245well

    Try the following after you have checked and loaded any updates.

    Fully charge the unit then take it outside well away from Buildings and Trees etc.

    Now do a Soft Reset, ie turn the unit on and when it is working hold the ON/OFF button down for about 20 seconds until you hear the drumroll sound then let the button go.

    Now create a route on it and have it ready as you would be when about to drive off. then leave the unit in the open for as much as 30 unites or more to see if it locks on to the Sats..

    All the best

  • xwintech
    xwintech Registered Users Posts: 304
    Supreme Pioneer
    @MAX1245well , Your device maybe vulnerable to WNRO. Check for any Navcore updates, as they will include the fix. If no updates are available then goto a place with clear sky and wait for around 10 minutes to get a GPS Fix. Also if there is a QuickGPSFix update, download and install it.