GPS signal not found for indoor activity
edited January 24
Signal not being found on indoor activity, just says please wait
What activity? Is the Heart symbol flashing? If so it means it is looking for signal and you may have it set for an eternal sensor. Press down from the clock and go to Sensors>Heart and make sure it is set for On, not External. This assumes you have a Cardio model which you can check by going to About and seeing if it says Cardio at the top. If not, you can only use an external HR strap so it will not start until you sync one or set Sensors>Heart to Off. If you are using Indoor Cycling, if you have the Bike Sensor enabled under Sensor>Bike and do not have one it will not start. You cannot use any of the GPS enabled activities indoor obviously, as you will not have GPS signal.
I hope this helped answer your question. If so, please mark it as a solution so others can look for it if they have the same question.
Many thanks for your help with this :bicyclist_tone1:
Welcome and support
Maps and Services
RoadTrips by TomTom
Community Knowledge Base