route bar display
cbrfireblade
Registered Users Posts: 84 
Sovereign Trailblazer
Sovereign Trailblazer
in RIDER
Hi guys, can ayone tell me when planning a route on mydrive and syncronise with device how do you display stops and klm to stops on route bar. I have stops switched on in the route bar display in settings.
cheers.
cheers.
0
Best Answer
-
Hi
@cbrfireblade
You're welcome, glad you're sorted
To help others in the community with similar problems....
If my reply answered your question ???
Then ON my Reply... Please answer 'Yes'
To... Did this answer the question? 'Yes'< >' No'
________________
Also In the Setting Menu.... You can set the Root Bar Arrival Information to the 'Next Stop' or 'Final Destination'
Check... Tap 4Dot (.... Menu) --> Setting --> Appearance --> Route Bar --> Arrival Information... Choose 'Final destination' or 'Next Stop'
Stay Safe... ATB YFM0
Answers
-
and klm at stops on the route bar.
no klm in the route bar
for the stops it is to send the stops without exceeding 200 -
-
Hi
@cbrfireblade
Here's a 20 stop .ITN Route with the stops displayed on the Route Bar....
Maybe useful....
If you use the Save & Sync option on the MyDrive Web Route Planner
You can use Stops in the planning stage, but Stops are not displayed on the Map screen or the Route bar... The Save & Sync option saves a .GPX Track... it's basically a bread crumb track that you follow....
A Route planned directly on the device is a .ITN Route a .ITN Route uses Stops and the device plans the route between the stops... An .ITN Route will respond to Live Traffic and any route deviations BUT an .ITN route will doggedly follow the stops in the order they were created, if you miss a stop, the device will continuously attempt to guide you to the missed stop... You have to cancel the problem stop on the device to avoid it
Using a .ITN Route planned on the MDW Route planner...
The latest version of MyDrive Web Route planner now uses 'Send Destination' or 'Send Stops' to send an .ITN Route
The MyDrive Web Route planner only sends the route to the device as a Destination... Or if you add Stops it send it as a Route (But it is not automatically saved in MyRoutes)
If you are using .ITN route and 'Send Stops' see my workaround below
Complex Multi Stop .ITN Route Rider 400
Be Aware....
If your starting point IS NOT your present location, there's a BUG
When using the 'Send Stops' option, during an "A" to "B" route transfer where 'A' IS NOT your present location... The device drops Location "A"
This bug also applies to Multi-Stop/Waypoint routes... 'A' to 'B' to 'C' to' D' to 'E' etc...
For more info, See... https://discussions.tomtom.com/en/discussion/comment/1198253/#Comment_1198253
______________________________________
This is the workaround method I use....
The Tomtom MyDrive Web Route Planner....
Get it Here... https://mydrive.tomtom.com
(1).... Plan my Route with the MyDrive Web Route planner (With or Without Stops as required)
(2)... Zoom in... Place a Sacrificial stop close to the Start Icon
(4)... Choose the 'Send Stops' option... The route will sync to your device
(5)... The device will calculate your route from your 'Present location'
(5.1)... The device will calculate your route using Stops in the order that you placed the Stops in the route
(5.2)... If the planned Start of the Route is your 'Present location'... Then skip Bullet-point... (6)
(6)... When the route has calculated, Pinch zoom to the correct start of your Route (The Sacrificial Stop Icon) 'Long Tap' (Tap and hold for +1 second) on the Sacrificial Stop Icon --> A quick menu opens --> Tap the 3Dot icon --> Choose 'Use as a Starting Point'
The device will calculate your route from your new location
(7)... Saving the Route
'Quick Tap' anywhere on the Route --> A quick menu opens --> Tap the 3Dot icon --> Manage route --> Add to my Routes.... Edit the Route name as required or simply Tap Add
_____________________________________
Note... (1) A 'Quick Tap' and 'Long Tap' of the screen gives different menu options
Note... (2) The MyDrive Web Route planner will sync a route with a Max of 20 stops
Stay Safe... ATB YFM2 -
Hi
@cbrfireblade
Here's a 20 stop .ITN Route with the stops displayed on the Route Bar....
Maybe useful....
If you use the Save & Sync option on the MyDrive Web Route Planner
You can use Stops in the planning stage, but Stops are not displayed on the Map screen or the Route bar... The Save & Sync option saves a .GPX Track... it's basically a bread crumb track that you follow....
A Route planned directly on the device is a .ITN Route a .ITN Route uses Stops and the device plans the route between the stops... An .ITN Route will respond to Live Traffic and any route deviations BUT an .ITN route will doggedly follow the stops in the order they were created, if you miss a stop, the device will continuously attempt to guide you to the missed stop... You have to cancel the problem stop on the device to avoid it
Using a .ITN Route planned on the MDW Route planner...
The latest version of MyDrive Web Route planner now uses 'Send Destination' or 'Send Stops' to send an .ITN Route
The MyDrive Web Route planner only sends the route to the device as a Destination... Or if you add Stops it send it as a Route (But it is not automatically saved in MyRoutes)
If you are using .ITN route and 'Send Stops' see my workaround below
Complex Multi Stop .ITN Route Rider 400
Be Aware....
If your starting point IS NOT your present location, there's a BUG
When using the 'Send Stops' option, during an "A" to "B" route transfer where 'A' IS NOT your present location... The device drops Location "A"
This bug also applies to Multi-Stop/Waypoint routes... 'A' to 'B' to 'C' to' D' to 'E' etc...
For more info, See... https://discussions.tomtom.com/en/discussion/comment/1198253/#Comment_1198253
______________________________________
This is the workaround method I use....
The Tomtom MyDrive Web Route Planner....
Get it Here... https://mydrive.tomtom.com
(1).... Plan my Route with the MyDrive Web Route planner (With or Without Stops as required)
(2)... Zoom in... Place a Sacrificial stop close to the Start Icon
(4)... Choose the 'Send Stops' option... The route will sync to your device
(5)... The device will calculate your route from your 'Present location'
(5.1)... The device will calculate your route using Stops in the order that you placed the Stops in the route
(5.2)... If the planned Start of the Route is your 'Present location'... Then skip Bullet-point... (6)
(6)... When the route has calculated, Pinch zoom to the correct start of your Route (The Sacrificial Stop Icon) 'Long Tap' (Tap and hold for +1 second) on the Sacrificial Stop Icon --> A quick menu opens --> Tap the 3Dot icon --> Choose 'Use as a Starting Point'
The device will calculate your route from your new location
(7)... Saving the Route
'Quick Tap' anywhere on the Route --> A quick menu opens --> Tap the 3Dot icon --> Manage route --> Add to my Routes.... Edit the Route name as required or simply Tap Add
_____________________________________
Note... (1) A 'Quick Tap' and 'Long Tap' of the screen gives different menu options
Note... (2) The MyDrive Web Route planner will sync a route with a Max of 20 stops
Stay Safe... ATB YFM
thanks yamfazman, just when riding a planned route its nice to see stops on the route bar and klm to stops.1 -
Hi
@cbrfireblade
You're welcome, glad you're sorted
To help others in the community with similar problems....
If my reply answered your question ???
Then ON my Reply... Please answer 'Yes'
To... Did this answer the question? 'Yes'< >' No'
________________
Also In the Setting Menu.... You can set the Root Bar Arrival Information to the 'Next Stop' or 'Final Destination'
Check... Tap 4Dot (.... Menu) --> Setting --> Appearance --> Route Bar --> Arrival Information... Choose 'Final destination' or 'Next Stop'
Stay Safe... ATB YFM0
