mydrive stops not showing on the RIDER 550
manu88
Posts: 1 [Apprentice Seeker]
when doing a route with mydrive in the bar of the 550 rider they do not appear, in spite of being well configured the bar, if they appear if the route is done in the gps itself.
Mod edit: Machine translated (Spanish)
Mod edit: Machine translated (Spanish)
0
Answers
Welcome to the community!
See a thorough solution/workaround provided by @YamFazMan on this topic-
https://discussions.tomtom.com/en/discussion/comment/1702945/#Comment_1702945
Does it help?
Regards, VIkram
Superusers
@manu88
Welcome to the site...
Further to Vikram's post....
A Route planned directly on the device generates a .ITN Route....
A Route planned using MyDrive Connect and saved to the device using the Save & Sync option is a .GPX Track... A .GPX Track is basically a breadcrumb track that you follow....
I prefer .ITN Routes....
A Route planned directly on the device is a .ITN Route
An .ITN Route uses Stops and the device plans the route between the stops... An .ITN Route will respond to Live Traffic and any route deviations BUT an .ITN route will doggedly follow the stops in the order they were created, if you miss a stop, the device will continuously attempt to guide you to the missed stop... You have to cancel the problem stop on the device to avoid it
If you want to force a different route you simply add more stops
Note...When you add the extra Stops Max Zoom right into the road
Don't put the stop on the wrong side of a dual track road (Journey loop back errors)
Don't put the stop up a side-road... It may guide you though a built-up area via side streets back to your route, instead of a u-turn
Don't put the stop on a traffic Island always place a guidance stop further up road on the route after the required traffic island exit....
Maybe Useful....
See... https://discussions.tomtom.com/en/discussion/comment/1702945/#Comment_1702945
Stay Safe... ATB YFM