GO Supreme map displayed with no route entered — TomTom Community

GO Supreme map displayed with no route entered

How does one get the display to a large map formatted like the one displayed when you have a destination entered into the GPS?

Best Answers

  • YamFazManYamFazMan Posts: 20,053
    Superusers
    edited April 9 Accepted Answer
    Hi
    @rtandberg1900
    Welcome to the site....
    The Latest NAV4/5 (Wi-Fi) devices are Map-Centric (Tomtom Speak) Route planning has the highest priority... When the device starts-up or if the route is cleared, the device defaults to the 2D North-up overview planning map screen....

    To change the Map view... Tap on the direction of Travel Icon, above the + and - Signs
    To toggle between the North-up Overview Planning Map and the Driving Map view chosen in the Setting menus i.e... 2D in direction of travel or 3D

    mulqpd39pdff.jpg
    The direction of Travel Icon is thinner more pointed in the 2D in direction of travel or 3D Driving view

    i82ldz9u5cf1.png
    The sequence when tapping on the 'Direction of Travel Icon' as I see it... I'm driving using my chosen driving view in the Setting Menus...
    For me 2D (In direction of Travel) + Zoom... Based on road type
    1st Tap --> North-up Overview planning Map
    2nd Tap --> 2D (Indirection of Travel) Max Zoom ??? Like the view from International Space Station
    3rd Tap --> Return to my chosen driving view (2D (In direction of Travel)) Normal Zoom....
    __________________________

    Cut & Paste from one of my previous posts
    Driving using the North-up Overview Planning Map
    My Normal Setting....
    2D Rotate in direction of travel
    Zoom... Based on road type

    I planned and calculated a route
    Tapped the direction of travel chevron to select the North-up overview map
    tapped the + sign 4 times to set the required zoom level....

    Set off on the route....
    The cursor that represent the current location does not remain centred like in 2D or 3D
    The 'Present Location Chevron' sits inboard from the edge of the screen about 20/25 percent and moves around the sides of the screen depending on the direction of travel, but it always stays on the screen (I think this is to show as much of the route as possible)

    The route was about 5 Miles, the zoom level remained normal as for using 'Zoom Based on road type' throughout the journey

    Stay Safe... ATB YFM
  • rtandberg1900rtandberg1900 Posts: 3 [Novice Seeker]
    Accepted Answer
    Thank you, YazFazMan B)

Answers

  • rider1riderrider1rider Posts: 1,109 [Exalted Pioneer]
    zoom out
  • rtandberg1900rtandberg1900 Posts: 3 [Novice Seeker]
    I've done this and it merely makes the view that I do not want larger. I want to be able to see a view like you get when having a destination selected but without a destination selected.
  • YamFazManYamFazMan Posts: 20,053
    Superusers
    edited April 9 Accepted Answer
    Hi
    @rtandberg1900
    Welcome to the site....
    The Latest NAV4/5 (Wi-Fi) devices are Map-Centric (Tomtom Speak) Route planning has the highest priority... When the device starts-up or if the route is cleared, the device defaults to the 2D North-up overview planning map screen....

    To change the Map view... Tap on the direction of Travel Icon, above the + and - Signs
    To toggle between the North-up Overview Planning Map and the Driving Map view chosen in the Setting menus i.e... 2D in direction of travel or 3D

    mulqpd39pdff.jpg
    The direction of Travel Icon is thinner more pointed in the 2D in direction of travel or 3D Driving view

    i82ldz9u5cf1.png
    The sequence when tapping on the 'Direction of Travel Icon' as I see it... I'm driving using my chosen driving view in the Setting Menus...
    For me 2D (In direction of Travel) + Zoom... Based on road type
    1st Tap --> North-up Overview planning Map
    2nd Tap --> 2D (Indirection of Travel) Max Zoom ??? Like the view from International Space Station
    3rd Tap --> Return to my chosen driving view (2D (In direction of Travel)) Normal Zoom....
    __________________________

    Cut & Paste from one of my previous posts
    Driving using the North-up Overview Planning Map
    My Normal Setting....
    2D Rotate in direction of travel
    Zoom... Based on road type

    I planned and calculated a route
    Tapped the direction of travel chevron to select the North-up overview map
    tapped the + sign 4 times to set the required zoom level....

    Set off on the route....
    The cursor that represent the current location does not remain centred like in 2D or 3D
    The 'Present Location Chevron' sits inboard from the edge of the screen about 20/25 percent and moves around the sides of the screen depending on the direction of travel, but it always stays on the screen (I think this is to show as much of the route as possible)

    The route was about 5 Miles, the zoom level remained normal as for using 'Zoom Based on road type' throughout the journey

    Stay Safe... ATB YFM
  • rtandberg1900rtandberg1900 Posts: 3 [Novice Seeker]
    Accepted Answer
    Thank you, YazFazMan B)
  • YamFazManYamFazMan Posts: 20,053
    Superusers
    Hi
    @rtandberg1900
    You're welcome, glad you're sorted :)

    Stay Safe... ATB YFM
Sign In or Register to comment.

Who's Online in this Category0