Speed radar in Mapshare

dr_grijando
dr_grijando Registered Users Posts: 3
Apprentice Seeker
I regularly edit on my PC with Mapshare.
What is the correct way to put a speed radar?
I find the system a bit confusing

Answers

  • Lochfrass
    Lochfrass Posts: 17,727
    Superuser
    tl6p5kcyu8ww.png

    When you zomm to the location the known cameras was shown on map.
    ferll44p2zcd.png

    If you want to make changes on existin Cameras, make a double click
    94q60663e4mm.png
    and
    xggpp1dnxgia.png


    To report a new camera click on the street and then the Camera icon.
    1m4ksvecibdi.png

  • dr_grijando
    dr_grijando Registered Users Posts: 3
    Apprentice Seeker
    In both examples I see that the radar is set as if it were taking the photo from the front of the vehicle. Is it always to be done this way?
    I ask this because in my region, the radars usually take the photo of the vehicle from behind, when it is moving away.
  • Lochfrass
    Lochfrass Posts: 17,727
    Superuser
    Ouggh.
    You caught me on the wrong foot.
    In Germany, photos are always taken from the front so that the driver can be recognized.
    Since I can give you unfortunately no answer to, but would assume that the direction of travel of the vehicles should be indicated from which the vehicles come to be flashed.