I have TomTom 620 How do I get it to ignore wifi for updates?

RikS
Registered Users Posts: 3 
Apprentice Seeker

Apprentice Seeker
when I connect the device I'm told I can use wifi and have no other options
0
Best Answer
-
Hi
@RikS
Welcome to the site....
The NAV5 (Wi-Fi) devices normally update using Wi-Fi....
If Wi-Fi is not available or is slow/unstable/unreliable.....
See Option... (2) Connect over USB....
TomTom Video... Updating your navigation device using Wi-Fi
If you have successfully connected your device to your Wi-Fi....
To check your Connection Speed, Signal Strength & Quality
On the Device... Tap 4Dot (.... Menu) --> Settings --> Wi-Fi
Tap on Your WI-FI name (The one Showing as connected)
A new Menu Page opens
On the left-hand side of the screen is your Wi-Fi Connection Status
Tomtom recommends a minimum Wi-Fi download speed of 30Mbps
Tomtom NAV5 (Wi-Fi) devices will only connect to a 2.4GHz Wi-Fi network
All the update actions are executed on the device...
___________________________
Option... (1) Connected Wi-Fi
Tap the 4Dot(.... Menu) --> Setting --> Updates & New Items
Extra Maps are Installed/Maintained... Tap the 4Dot(.... Menu) --> Setting --> Maps
I always update my devices one Update at a time
The NavCore Application and QuickFixGPS updates are force ticked by Tomtom... Deselect any other updates like Maps, Speed Cams etc... Update the mandatory item/s first, when complete update the remaining items one at a time
Note... NAV(5 Wi-Fi) devices connected over Wi-Fi do not require MyDrive Connect to be running Even if MyDrive is running you have no access the MyDrive Connect menu structures as used by the previous NAV3 & 4 devices
____________________________
Option... (2) Connected USB
If Wi-Fi is not available or is slow/unstable/unreliable.....
Tomtom recommends a minimum Wi-Fi download speed of 30Mbps
Connecting hard-wired over USB is normally more reliable than any Over The Air Connections
Updating your new device over USB will require "MyDrive Connect"
Get it here..... https://help.tomtom.com/hc/en-gb/articles/360013959499-Installing-MyDrive-Connect
Install and Run MyDrive Connect
There's no need to login to MyDrive Connect... See Note... (1)
Connect your Device to a USB Port on your PC
The Update will hopefully complete
If you're using a Laptop it would be also more advisable to use a hard-wire connection back from the Laptop to the Router....
_________________________
Note... (1) MyDrive Connect will only show a "Splash screen" saying "Connect your device using Wi-Fi" etc....
If required you can close the 'Main Mydrive Window' showing the "Connect your device using Wi-Fi" Splash screen... MyDrive Connect only needs to run in the background on the PC Taskbar... The NAV(5 Wi-Fi) devices have no access the MyDrive Menu structures as used by the previous NAV3 & 4 devices
Updating a NAV5 (Wi-Fi) device using USB is the same as using Wi-Fi, all the update actions are executed on the device...
Tap the 4Dot (.... Menu) --> Setting --> Updates & New Items
Extra Maps are Installed/Maintained... Tap the 4Dot(.... Menu) --> Setting --> Maps
Stay Safe... ATB YFM
5
Answers
-
Hi @RikS
If you load the Tomtom My Drive Connect software on your PC then when the software is running you attach the GO620 you will see the Do it the easy ways screen on the PC. Just ignore this and use the menu options on the unit to manage the updates.
All you are doing is using the PC with the software running as access to the internet.
Why do you want to ignore the Wifi connection with the GO620?
Doug0 -
I like being able to see what's happening on my PC screen and it should be somewhat faster0
-
Hi
@RikS
Welcome to the site....
The NAV5 (Wi-Fi) devices normally update using Wi-Fi....
If Wi-Fi is not available or is slow/unstable/unreliable.....
See Option... (2) Connect over USB....
TomTom Video... Updating your navigation device using Wi-Fi
If you have successfully connected your device to your Wi-Fi....
To check your Connection Speed, Signal Strength & Quality
On the Device... Tap 4Dot (.... Menu) --> Settings --> Wi-Fi
Tap on Your WI-FI name (The one Showing as connected)
A new Menu Page opens
On the left-hand side of the screen is your Wi-Fi Connection Status
Tomtom recommends a minimum Wi-Fi download speed of 30Mbps
Tomtom NAV5 (Wi-Fi) devices will only connect to a 2.4GHz Wi-Fi network
All the update actions are executed on the device...
___________________________
Option... (1) Connected Wi-Fi
Tap the 4Dot(.... Menu) --> Setting --> Updates & New Items
Extra Maps are Installed/Maintained... Tap the 4Dot(.... Menu) --> Setting --> Maps
I always update my devices one Update at a time
The NavCore Application and QuickFixGPS updates are force ticked by Tomtom... Deselect any other updates like Maps, Speed Cams etc... Update the mandatory item/s first, when complete update the remaining items one at a time
Note... NAV(5 Wi-Fi) devices connected over Wi-Fi do not require MyDrive Connect to be running Even if MyDrive is running you have no access the MyDrive Connect menu structures as used by the previous NAV3 & 4 devices
____________________________
Option... (2) Connected USB
If Wi-Fi is not available or is slow/unstable/unreliable.....
Tomtom recommends a minimum Wi-Fi download speed of 30Mbps
Connecting hard-wired over USB is normally more reliable than any Over The Air Connections
Updating your new device over USB will require "MyDrive Connect"
Get it here..... https://help.tomtom.com/hc/en-gb/articles/360013959499-Installing-MyDrive-Connect
Install and Run MyDrive Connect
There's no need to login to MyDrive Connect... See Note... (1)
Connect your Device to a USB Port on your PC
The Update will hopefully complete
If you're using a Laptop it would be also more advisable to use a hard-wire connection back from the Laptop to the Router....
_________________________
Note... (1) MyDrive Connect will only show a "Splash screen" saying "Connect your device using Wi-Fi" etc....
If required you can close the 'Main Mydrive Window' showing the "Connect your device using Wi-Fi" Splash screen... MyDrive Connect only needs to run in the background on the PC Taskbar... The NAV(5 Wi-Fi) devices have no access the MyDrive Menu structures as used by the previous NAV3 & 4 devices
Updating a NAV5 (Wi-Fi) device using USB is the same as using Wi-Fi, all the update actions are executed on the device...
Tap the 4Dot (.... Menu) --> Setting --> Updates & New Items
Extra Maps are Installed/Maintained... Tap the 4Dot(.... Menu) --> Setting --> Maps
Stay Safe... ATB YFM
5 -
thanks I guess I'm living in the past
0