I'm having trouble with downloading a new map and only have error-messages

Flouwers

The update of the map was disconnected and afterworths I couldn't renew the map. I've given a reset but at the moment I only have error messages and can't change anything. Hopefully somebody can help me.

YamFazMan

Hi
@Flouwers

Firstly what's the Error message ???
________________________

The NAV5 (Wi-Fi) devices like you’re Go 5200 (Wi-Fi) normally update using Wi-Fi...

TomTom Video... Updating your navigation device using Wi-Fi®



If you have successfully connected your device to your Wi-Fi....
To check your Connection Speed, Signal Strength & Quality
On the Device... Tap 4Dot (.... Menu) --> Settings --> Wi-Fi
Tap on the Your Wi-fi name (The one Showing as connected)
A new Menu Page opens


On the left-hand side of the screen is your Wi-Fi Connection Status

Tomtom recommend a minimum Wi-Fi download speed of 30Mbps
Tomtom NAV5 (Wi-Fi) devices will only connect to a 2.4GHz Wi-Fi network
All the update actions are executed on the device...
___________________________

If Wi-Fi is not available or is slow/unstable/unreliable.....
See Option... (2) Connect over USB
___________________________

Option... (1) Connected Wi-Fi
Tap the 4Dot(.... Menu) --> Setting --> Updates & New Items
Extra Maps are Installed/Maintained... Tap the 4Dot(.... Menu) --> Setting --> Maps

I always update my devices one Update at a time
The NavCore Application and QuickFixGPS updates are force ticked by Tomtom... Deselect any other updates like Maps, Speed Cams etc... Update the mandatory item/s first, when complete update the remaining items one at a time

Note... NAV(5 Wifi) devices connected over Wifi do not require MyDrive Connect to be running Even if myDrive is running you have no access the MyDrive Connect menu structures as used by the previous NAV3 & 4 devices

Option... (2) Connected USB
If Wi-Fi is not available or is slow/unstable/unreliable.....
Tomtom recommend a minimum Wi-Fi download speed of 30Mbps
Updating your new NAV5 (Wi-Fi) device over USB will require "MyDrive Connect"
Get it here.....
www.tomtom.com/getstarted
Run MyDrive Connect.....
Note... The NAV(5 Wifi) devices have no access the MyDrive Menu structures as used by the previous NAV3 & 4 devices
Connect your Device to a USB Port on your PC
Updating a NAV5 (Wi-Fi) device using USB is the same as using Wi-Fi, all of the update actions are executed on the device...
Tap the 4Dot(.... Menu) --> Setting --> Updates & New Items
Extra Maps are Installed/Maintained... Tap the 4Dot(.... Menu) --> Setting --> Maps
__________________________

Note... MyDrive Connect will only show a "Splash screen" saying "Connect your device using Wifi" etc
If required you can close the 'Main Mydrive Window' showing the "Connect your device using Wifi" Splash screen... MyDrive Connect only needs to run in the background on the PC TaskBar


ATB YFM

YamFazMan

Hi
@Flouwers

Firstly what's the Error message ???
________________________

The NAV5 (Wi-Fi) devices like you’re Go 5200 (Wi-Fi) normally update using Wi-Fi...

TomTom Video... Updating your navigation device using Wi-Fi®



If you have successfully connected your device to your Wi-Fi....
To check your Connection Speed, Signal Strength & Quality
On the Device... Tap 4Dot (.... Menu) --> Settings --> Wi-Fi
Tap on the Your Wi-fi name (The one Showing as connected)
A new Menu Page opens


On the left-hand side of the screen is your Wi-Fi Connection Status

Tomtom recommend a minimum Wi-Fi download speed of 30Mbps
Tomtom NAV5 (Wi-Fi) devices will only connect to a 2.4GHz Wi-Fi network
All the update actions are executed on the device...
___________________________

If Wi-Fi is not available or is slow/unstable/unreliable.....
See Option... (2) Connect over USB
___________________________

Option... (1) Connected Wi-Fi
Tap the 4Dot(.... Menu) --> Setting --> Updates & New Items
Extra Maps are Installed/Maintained... Tap the 4Dot(.... Menu) --> Setting --> Maps

I always update my devices one Update at a time
The NavCore Application and QuickFixGPS updates are force ticked by Tomtom... Deselect any other updates like Maps, Speed Cams etc... Update the mandatory item/s first, when complete update the remaining items one at a time

Note... NAV(5 Wifi) devices connected over Wifi do not require MyDrive Connect to be running Even if myDrive is running you have no access the MyDrive Connect menu structures as used by the previous NAV3 & 4 devices

Option... (2) Connected USB
If Wi-Fi is not available or is slow/unstable/unreliable.....
Tomtom recommend a minimum Wi-Fi download speed of 30Mbps
Updating your new NAV5 (Wi-Fi) device over USB will require "MyDrive Connect"
Get it here.....
www.tomtom.com/getstarted
Run MyDrive Connect.....
Note... The NAV(5 Wifi) devices have no access the MyDrive Menu structures as used by the previous NAV3 & 4 devices
Connect your Device to a USB Port on your PC
Updating a NAV5 (Wi-Fi) device using USB is the same as using Wi-Fi, all of the update actions are executed on the device...
Tap the 4Dot(.... Menu) --> Setting --> Updates & New Items
Extra Maps are Installed/Maintained... Tap the 4Dot(.... Menu) --> Setting --> Maps
__________________________

Note... MyDrive Connect will only show a "Splash screen" saying "Connect your device using Wifi" etc
If required you can close the 'Main Mydrive Window' showing the "Connect your device using Wifi" Splash screen... MyDrive Connect only needs to run in the background on the PC TaskBar


ATB YFM

Flouwers

Thanks for your answer. After a new reset the system accepted the new map. Don't know what the problem has been. The error message was: 'Oeps something went wrong'. A message without any content ;-) The wifi connection is working and hopefully will continue in the near future :-)