seem to have a charging issues
Mikenicoll
Posts: 1 [New Seeker]
in Map quality
hi all
been using my tomtom 6250 for about 1 year 5 month
recently had problem with it running out off battery when out on the road so upgraded my USB charger to a 5v/2.4a
but again it's still running out off battery life when out on the road . some time while driving it will come up with the automatic disconnect count down as if it's not charging anymore
any advice
thanks
been using my tomtom 6250 for about 1 year 5 month
recently had problem with it running out off battery when out on the road so upgraded my USB charger to a 5v/2.4a
but again it's still running out off battery life when out on the road . some time while driving it will come up with the automatic disconnect count down as if it's not charging anymore
any advice
thanks
0
Answers
Superusers
@Mikenicoll
The Previous NAV4 and Latest (NAV5 WiFi) devices are quite power hungry and can go into "Power saving mode" if not supplied with enough power
When the device is In use they are designed to be always connected to a power supply
The Tomtom supplied Power Adapter is rated at 5Volts 1.2Amps
Even after you have recharged the device externally via a mains charger, when in use in the vehicle, they will still require being connected to a Tomtom supplied Power Adapter (Or a proven suitable 3rd party Power adapter)
______________________________________
(1)... Do NOT attach them to a dashboard USB port in your vehicle as they normally only supply 500mAmp (0.5Amp) and are for data transfer and not supplying power: See... Note (1) & (2)
(2)... Using a NONE Tomtom 3rd party underpowered or a mismatched cigarette lighter charger can cause the device to go into Power Saving Mode: See... Note (1)
(3)... On the Models with a built-in SIM, the reduction of power to the SIM can cause the dropping of the traffic info: Note (3)
Note (1)... At an (Undisclosed) percentage of battery discharge, the device will try to save its power requirements by dimming the screen and eventually powers off the device... Devices with a built-in SIM Card may also lose Live Traffic services
Note (2)... A dashboard USB port can also fool a NAV4 Device into entering 'Updating Mode' and display the Connected to your Computer splash screen
Note (3)... I tried connecting my Tomtom GO 6200 to my Cars USB port, checked the connection status it reports 'Connected over USB' --> 'GPRS (SIM) Disconnected'
_______________________________________
As a test...
Try using the Tomtom supplied cable and Tomtom supplied Power Adapter
The Charger Adaptor and USB Cable supplied by Tomtom WILL run and charge the device at the same time
Many 3rd party Mismatched Charger Adaptors won't run and charge the device at the same time
See... It's not simply a power thing.....
https://discussions.tomtom.com/en/discussion/comment/1182024/#Comment_1182024
ATB YFM
Superuser
Firstly if you connect your unit and it is working does it turn off or go into sleep mode if you unplug it or turn off the ignition. This will indicate if it is being charged whilst in use.
If it is then I would suggest that you get a genuine Tomtom cig charger unit. It has been found, and @yamfazman is the expert in this, that some of the so called more powerful chargers are not as effective as they appear to be. Some have been found to still put the unit into power save mode and fail to keep the unit working on longer journeys
By the way just to be clear I am a customer like you not an employee of Tomtom.
Doug
Superusers
@mikencoll
NAV4 and NAV5 (Wi-Fi) devices battery charge status....
Tap the 4Dot (.... Menu) button... On the Menu Screen top right is a battery status Icon
Charging... Displays when Connected to a Power supply
Full Charge... Displays when Connected or Not Connected Power supply
Half Charge... Displays when NOT Connected Power supply
Low Battery... Displays when NOT Connected Power supply
One of the worst things you can do to a Lithium battery is to run it flat so at a certain percentage of discharge (Unspecified)... The device will go into 'Power Saving Mode' the screen will dull, and the device will eventually turn itself off (Not Sleep)
There is a Battery Status display available on the devices Status Screen
Press and hold the on/off button until you hear a drum-roll sound Continue to hold the on/off button until the Black & White Status screen is shown.....
If you are worrying about the device charging, you might consider one of these gadgets
Simply plug the device into the USB socket and plug your lead into the USB Doctor, the device will display the Voltage and Power being used by your various USB devices
I have one of each type they're only peanuts to buy, search Amazon/eBay for USB Doctor
ATB YFM