Tomtom not redirecting my route — TomTom Community

Tomtom not redirecting my route

BabypinkBabypink Posts: 14 [Master Explorer]
Anyone use TomTom Rider Sat Nav? I plotted a map on PC and downloaded it to the device. No problem. Set off to Liverpool avoiding motorway. I then nearing Bolton missed a turning and for some reason the TomTom would not redirect me back on to the planned route. Thankfully I could see the purple route just about and managed to navigate myself back to it. I thought it was a one off but it's done it again. Now when I did the route home on the device only yesterday I did purposely miss a turn to see if it would redirect and it did. Has anyone else come across this before?

Answers

  • YamFazManYamFazMan Posts: 18,459
    Superusers
    edited June 2019
    Hi
    @Babypink

    I guess you used the Save & Sync option on the MyDrive Web Route Planner
    The Save & Sync option save a .GPX Track... its basicly a bread crumb track that you follow

    The Route planned directly on the device is a .ITN Route the .ITN Route uses Stops and the device plans the route between the stops... An .ITN Route will will respond to Live Traffic and any route deviations BUT an .ITN route will doggedly follow the stops in the order they were created, if you miss a stop, the device will continuously attempt to guide you to the missed stop... You have to cancel the problem stop on the device to avoid it

    Using a .ITN Route planned on the MDW Route planner...
    The latest version of MyDrive Web Route planner now uses 'Send Destination' or 'Send Stops' to send an .ITN Route
    The MyDrive Web Route planner only sends the route to the device as a Destination... Or if you add Stops it send it as a Route (But it's is not automatically saved in MyRoutes)
    If you are using .ITN route and 'Send Stops'
    see my workaround below

    x9kkavu7m0o4.jpg

    qkw01ev5tv6s.jpg

    Complex Muti Stop .ITN Route Rider 400
    lv3gbgezr1sx.jpg

    Be Aware....
    If your starting point IS NOT your present location there's a BUG
    When using the 'Send Stops' option, during an "A" to "B" route transfer where 'A' IS NOT your present location... The device drops Location "A"
    This bug also applies also to Multi-Stop/Waypoint routes... 'A' to 'B' to 'C' to' D' to 'E' etc...


    For more info See... https://discussions.tomtom.com/en/discussion/comment/1198253/#Comment_1198253
    ______________________________________

    This is the workaround method I use....

    The Tomtom MyDrive Web Route Planner....
    Get it Here... https://mydrive.tomtom.com

    (1).... Plan my Route with the MyDrive Web Route planner (With or Without Stops as required)

    (2)... Zoom in... Place a Sacrificial stop close to the Start Icon

    8eaec27f-eba6-4332-bbb7-38ecfdac3110.png
    (4)... Choose the 'Send Stops' option... The route will sync to your device

    (5)... The device will calculate your route from your 'Present location'
    (5.1)... The device will calculate your route using Stops in the order that you placed the Stops in the route
    (5.2)... If the planned Start of the Route is your 'Present location'... Then skip Bullet-point... (6)

    (6)...When the route has calculated, Pinch zoom to the correct start of your Route (The Sacrificial Stop Icon) 'Long Tap' (Tap and hold for +1 second) on the Sacrificial Stop Icon --> A quick menu opens --> Tap the 3Dot icon --> Choose 'Use as a Starting Point'
    The device will calculate your route from your new location

    (7)... Saving the Route
    'Quick Tap' anywhere on the Route --> A quick menu opens --> Tap the 3Dot icon --> Manage route --> Add to my Routes.... Edit the route name as required or simply Tap Add
    _____________________________________

    Note... (1) A 'Quick Tap' and 'Long Tap' of the screen gives different menu options
    Note... (2) The MyDrive Web Route planner will sync a route with a Max of 20 stops

    ATB YFM
Sign In or Register to comment.

Who's Online in this Category0