update

cyclone2007cyclone2007 Posts: 2 [Apprentice Seeker]
my go 6000 will not update goes as far as white square box on screen version 4253734 and that's it goes no further.

Comments

  • DougLapDougLap Posts: 2,587 Superuser
    Hi @cyclone2007

    If you have not got any extra memory installed then get a Micro SD Class 10 Memory card. Sandisk or Samsung or similar major maker from a reliable source to avoid Fake cards

    !6gb or Max 32 Gb card recommended

    This will enable the unit to be updated as the European Map will now load on the extra memory card and delete the old one on the internal memory.

    The European map is now as much as 8.9gb whereas you internal memory is only 8gb and is needed if the Operating Software and still have 400mb of free space for operational purposes.

    Doug
  • cyclone2007cyclone2007 Posts: 2 [Apprentice Seeker]
    thanks Doug already got a 32 gb in it.
  • DougLapDougLap Posts: 2,587 Superuser
    Hi @cyclone2007

    When you inserted the card did the GO6000 ask you what you wanted it to be formatted for . Ie Maps or Routes

    Is there already a map on the extra memory.

    Have you tried a Soft Reset. Hold the ON/OFF button down fro about 20 seconds until you hear the drum roll sound.. If that does not sort it the a Factory Reset. Tap Menu, Tap Settings, Tap System Tap Reset Device. Make sure your unit is well charged before doing the resets and with the Full Reset it will delete all your Favourites (MyPlaces), Poi and Route Files. The nit has reset these should be synced back to the unit from your account.

    Doug
Sign In or Register to comment.

Who's Online36

babybox
babybox
schlimpi
schlimpi
TomDone
TomDone
+33 Guests