Changing a track to a route on Via 1525TM

sdumontsr
Registered Users Posts: 7 
Master Explorer

Master Explorer
Can a track be changed into a route on my GPS? When planning a route using the route planner, I had 3 different tracks and wanted to use the middle one. When I put in the street address where I was going it was not the one I wanted. How can I change this?
0
Comments
-
Hi
@sdumontsr
Just add a stop to the required route before you save & sync the track
More stops may be needed if you want to force the track to follow a particular route
ATB YFM0 -
YamFazMan wrote:Hi
@sdumontsr
Just add a stop to the required route before you save & sync the track
More stops may be needed if you want to force the track to follow a particular route
ATB YFM0 -
sdumontsr wrote:Can a track be changed into a route on my GPS?0
-
Hi
@sdumontsrsdumontsr wrote:Can a track be changed into a route on my GPS? When planning a route using the route planner, I had 3 different tracks and wanted to use the middle one. When I put in the street address where I was going it was not the one I wanted. How can I change this?
but when you send your route to the device it wasn't the route you wanted
ATB YFM0 -
The track stays the same when I sent it to my Via 1525TM, but I wanted to change the track to the route so I got turn by turn instructions, as the track doesn't do that. I couldn't figure out how to force the GPS to follow this route. Same thing on the return trip, but we followed the printed out written instructions. It kept wanting to send us to I-95 in Florida and we wanted to follow Route 301 North. Also how can I get the 1535 TM to do an alternate route? Maybe that's what I was looking for. Thanks for your help.0
-
@sdumontsr
Once a route is created on the device:
Tap the driving screen-->Change Route-->Calculate alternative.0 -
Thanks, I will have to give that a try and see what happens.0
-
Hi
@sdumontsrsdumontsr wrote:The track stays the same when I sent it to my Via 1525TM, but I wanted to change the track to the route so I got turn by turn instructions, as the track doesn't do that
Check...
Tap 4Dot (.... Menu)
Are any of the Sound Icons slashed though or is the Volume slider set to the left ???
ATB YFM0 -
So I played around with my Via 1525 TM this morning. I touched the screen and nothing happened after I planned a route. If I touch the top arrow then it gives me turn by turn directions, nothing to change to alternate route. Then I wanted to cancel the route and found no way to do that. My Via 1535 TM was better than this one. At least it did these two things. Ba hum bug.. If I hit the menu button there is nothing in there to do either of these two things.0
-
Hi
@sdumontsr
The Via 1525 is a NAV4 Device
To access the Setting menu... Tap 4Dot (.... Menu) screen bottom left
To change to an alternate route....
(1)... Plan a route
(2)... Tap 4Dot (.... Menu) --> Tap Current Route --> Find Alternative... The device will offer three alternate routes... Select as required
To Clear present route....
(1)... With a route planned
(2)... Tap 4Dot (....) --> Tap Current Route... Tap Clear route
ATB YFM0 -
Thanks again, I ended up calling TomTom support and he walked me through it as I had it hooked up to my pc. Everything is good now. Great work that this community does. He has sent me the correct manual for the Via. I kept getting the old ones online.0