Camera reporting icon on Rider 400

marcop1952
Registered Users Posts: 45 
Legendary Explorer

Legendary Explorer
On a recent trip, I noticed that the icon for reporting speed cameras became greyed out/inactive, then became active again, and then off again. Any ideas what could be causing this? Tomtom services were connected to my phone at the time.
0
Comments
-
Hi
@marcop1952
For general improvement using the Tomtom Speed Cam Database over the default settings
Use a Computer voice...
Also....
From the main screen... Tap (.... Menu) -> Setting -> Sounds & Warnings...
Set... 'Warning Type' to... Read Allowed... (Important... Needs a Computer Voice set in the Voices menu)
Speed Cameras & Hazards... Set to ON
The next 10 Setting ALL set to Always
The next 4 Settings ALL set to ON
The device will now say....
'Fixed Camera'
'Mobile Hot Spot'
'Red light Camera'
Spoken Traffic delays
Speed Cams
If you keep a check on the Traffic-bar... The device gives you a visual Warning of the next Fixed or Mobile Speed Camera many miles before you reach the camera
Even more info if in the 'Setting menus' you setup a Wide Traffic/Route Bar
___________________________________
When you enter a Speed Camera Warning Zone/Hotspot....
The 'Report a Camera Icon' is grayed-out... Then as you pass the Cameras actual location, the Report a Camera Icon becomes Live... Tap the button to report the Camera
ATB YFM0 -
Thank you. All my settings are as you described above. I did not know that the icon becomes "greyed out" at a camera location, until you have passed it. I will keep an eye on the icon, during my next ride.0