Via 62 Help Question

Daveg14
Registered Users Posts: 3 
Apprentice Traveler

Apprentice Traveler
After I have got to my finishing point the sat nav just points to a arrow on the map where I am is there a way of to continue showing the roads and street names without navigating to a place
0
Comments
-
Menu-->current route-->cancel current route0
-
Hi
@Daveg14
Sorry there is not an option to turn off 'Automatic Route Clearance'
As far as I recall... Automatic Route Clearance Rules
(1)… When you arrive to destination the route will be cleared (Inside a 50m radius)
(2)… When the last known location is less than 400 meters from your destination AND it has been more than 120 minutes since the user suspend/turn off device, the route will be cleared automatically on the device.
(3)… When the user suspends the device for more than a week, the route will be cleared automatically on the device.
____________________________________
Maybe useful... In the Setting menu
You can turn off the automatic Map switching to the North-up overview map
With "Automatic Map Switching" turned off when you arrive at your destination the device will continue using your chosen navigation screen to show your present location...
Note... you may need to tap the Plus Icon button (Situated Under the 'Direction of Travel' Icon) a couple of times to zoom in for the map detail
(At least it stops the the Map switching to the North-up overview map with a zoom level view like the view from International Space Station)
____________________________________
Setting-up... From the main screen
Tap the 4Dot (.... Menu) --> Setting --> Appearance....
Turn off Automatic Map view switching
Tap Blue arrow head Icon ( > ) top right on screen to exit
But unfortunately this has an effect to both ends of the journey.....
If you have turned off Automatic Map view switching
Now whenever you have planned a route, you will have to tap the "Lets Go" banner or the "Direction of travel Icon" the arrowhead above the plus and minus buttons
To switch to your chosen navigating screen
The Map does not switch at either the start or the end of your journey
_____________________________________
There are also three options for the Zoom function.....
(1)..... Zoom into next turn
(2)..... Based on road type... I prefer the zoom set to 'Based on road type'
(3)..... None
From the main screen
Tap the 4Dot (.... Menu) --> Setting --> Appearance --> Automatic zoom....
Choose the required option
Tap Blue arrow head Icon ( > ) top right on screen to exit
ATB YFM0 -
Thank you very much sorry for the long delay in replying have done as you suggested and it worked fine many thanks David0